Pharmaceutical Sensors
Pharmaceutical manufacturing demands the highest integrity in production equipment in order to maintain the standards set by the FDA and other regulatory bodies.
The integrity of any equipment is only as good as the sum of its component parts. It is within this sphere that Thermal Detection have specialised and brought a higher degree of reliability to temperature sensing than was previously experienced in this area.
Our radical approach to investigate and provide solutions for the sterilisation process has been one of our main goals for the pharmaceutical, biotechnology and healthcare sector. The net result of this has enabled us to offer products that provide the customer with a trouble free and efficient sterilization regime.
The cost of autoclave down-time is constantly increasing together with other overhead costs. In this environment it is of the utmost importance for operators to have confidence in their equipment whether this is on the production line or in the laboratory. A product which offers an extended life cycle not only assists in controlling overhead costs, but is effectively also environmentally friendly.
Steriprobe® (SL100) Autoclave Chamber/Load Probe Sensor
The SL100 Steriprobe® load and chamber probe (SL104 Sterimaster® in the USA) were specifically designed to meet the dema... read more
Autoclave Chamber/Load Probe (SL160) Sensor :
The SL160 series of autoclave chamber/load probe sensors are similar to the SL150 series, but differ in having a 90° ben... read more
Autoclave Chamber/Load Probe (SL150) Sensor
The series SL150 autoclave chamber/load probe offers increased flexibility with a tough, thick walled silicone rubber pr... read more
Validation Thermocouple Entry Glands (TCEG/1 and TCEG/2)
Our experience in supplying and working with our customers in the pharmaceutical sector led us to consider an improved m... read more
Validation Thermocouple Wire and Looms (VTFP):
It is a regulatory requirement when validating autoclaves and lyophilizers that Type ‘T´ thermocouples of Class 1 ... read more
Thermocouple Capacitance Welder (CW):
Although thermocouple hot junctions are frequently made by twisting a pair of conductors together by hand, this is not c... read more
Autoclave Drain/Air Filter (SD050) or Freezer (SD051) Sensor :
The SD050 series drain/air detector and freezer sensor is not presented with the same demanding conditions that are expe... read more
Freeze Dryer (FD100) Sensor :
The FD100 freeze dryer sensor was designed to measure very small volumes of liquid product, typically like those found i... read more
Sensor (SSA200) with Hermetically Sealed Connector :
The SSA200 series was originally designed for use with portable process plant within the pharmaceutical industry such as... read more
Autoclave Chamber Entry (CPF) Adaptors:
The CPF series of adaptors were designed as high integrity entry gland seals for autoclave probes and provide a single a... read more
Steam Quality (Series 600) Test Kit
High quality steam — an essential requirement for maintaining optimum results in steam sterilisation cycles.... read more
Probe Mounting Cap (GL45) for Duran® Bottles and Others
These caps are modified to ensure the optimum positioning of a temperature probe when placed in a liquid product vessel ... read more
High Density (HDe) Feedthrough :
The HDe series high density feedthrough will permit from 6 to 30 thermocouples or alternatively 12 to 60 copper conducto... read more
Single (PG) and Multiple (MHM and MHC) Feedthroughs :
The PG, MHM and MHC series of feedthroughs were designed to produce a leak free method of passing a single probe (PG) or... read more
Light Duty Pharmaceutical (LDP, LDPS & LDPF) Sensor :
Where temperature measurement is required to be made on pharmaceutical process plant, the LDP series offers a simple an... read more
Medium Duty Pharmaceutical (MDP, MDPS & MDPF) Sensor :
The MDP series is similar to the LDP light duty series, but it has a more rugged construction and is designed for use in... read more
Stainless Steel Spool and Ampoule Holder:
Stainless steel spools can be produced to suit various pipe sizes and using Tri-clover mounting flanges. ... read more
Ambient Air (AA) Temperature Sensor
The AA series of ambient air temperature sensors are designed to measure the ambient air temperature in laboratories and... read more
Kapton® Tape:
The choice of adhesive backed tapes that are suitable for use in the environment of an autoclave chamber during sterilis... read more
